Magnet Valves

Magnet valves with direct control, normally closed
 

•      Working pressure range: 0-10 bar (with oils: 0-5 bar) - not required inlet pressure
•      Max. work (static) pressure: 16 bar
•      Fluids: water, air, oil below 20 cSt
•      Voltage: 220V AC, 24V DC (standard) on request: 12V DC, 24V AC, 110 V AC
•      Diaphragm: NBR

*Membrane material, working temperatures and fluids

Direct control magnet valve, normally closed, stainless steel

•      Fluids: water, air, oil below 20 cSt
•      Voltage: AC220 (standard), AC110, DC24, DC12 V
•      Max. operating pressure: 16 bar
•      Working pressure range: 0-10 bar (oils: 0-5 bar)
•      Stainless steel AISI 304

Indirect control magnet valve, normally closed, stainless steel

•      Fluids: water, air, oil below 20 cSt
•      Voltage: AC220 (standard), AC110, DC24, DC12 V
•      Max. working pressure: 17 bar
•      Working pressure range: 0.5 to 13 bar
•      Stainless steel AISI 304

Magnet valves for fuel normally closed MN15
 

•     Size: 3 /8 " and 1/2"
•     Nominal diameter : DN10
•     Power supply : 230V AC, 50-60 Hz or 24V AC, 50 Hz
•     Degree of protection : IP65
•     Consumption : 21-23 VA
•     Hole Diameter : Ø5, 6 mm
•     Permeate flow rate : ≈ 10 l / min ( at inlet pressure 1 bar)
•     Working pressure range : max. 4 bar
•     Fluids : fuel oil , diesel, oils with viscosity up to 8 ° E
•     Operating temperature range : -5 ° C ÷ +60 ° C
•     Body material: brass OT- 58 membrane Viton
•     automatic closing
•     Mounting Length: 50 mm
•     Mounting height, including the coil and plug 90 mm
•     Complete with coil cable and connector
•     Manufacturer : Madas - Italy

Solenoid valves indirectly controls, normally closed
 

•      Membrane: VITON
•      Voltage: AC220 (standard), DC24 V
•      High pressure: max. working pressure: 70 bar

Magnet valves with direct control, normally closed, plastic, for use mainly in water and pneumatic systems
 

•     Working pressure range: 0-8 bar, do not require inlet pressure
•      Max. work (static) pressure: 10 bar
•      Fluids: water, air and other fluids having a viscosity below 20 cSt
•      Working fluid temperature: 0 ÷ 65°C
•      Voltage: 230V AC ± 10%.
•      Coil consumption: 33 VA
•      Material: Nylon (PA6)
•      Membrane material: NBR
•      Complete with coil cable and connector

* The flow rate is set at a pressure drop of 1 bar.

•      Working pressure range: 0.5 to 13 bar
•      Max. work (static) pressure: 17 bar
•      Fluids: water, air, oil below 20 cSt
•      Voltage: 220V AC, 24V DC (standard) on request: 12V DC, 24V AC, 110 V DC
•      Membrane: NBR

•      Working pressure range: 0.5 to 8 bar
•      Max. work (static) pressure: 12 bar
•      Fluids: water, air, oil below 20 cSt
•      Voltage: 220V AC, 24V DC (standard) on request: 12V DC, 24V AC, 110 V DC
•      Membrane: NBR

•      Working pressure range: 0.5 to 13 bar
•      Max. work (static) pressure: 13 bar
•      Fluids: steam, water, air, oil below 50 cSt
•      Voltage: 220V AC
•      Material: Bronze or stainless steel AISI 304
•      Membrane: TEFLON